Colibrino homePlan a station
Menu

UL 2849 vs UL 2271: what e-bike safety labels mean in 2026

The reader questionWhat is the difference between UL 2849 and UL 2271, and what would CPSC's 2026 proposed rule change for e-bikes and batteries?

An e-bike frame and a separate battery pack lying side by side on a workbench, each with a small blank round tag tied on with string, and a jeweler's loupe resting between them.

UL 2849 certifies an e-bike’s whole electrical system: battery, battery management system, charger, motor, controller and wiring, tested together as one bike. UL 2271 certifies a lithium-ion battery pack for light electric vehicles on its own, which is the mark that matters for a spare or replacement battery sold separately; a UL 2849 bike’s battery is checked against UL 2271 (or UL 2580) as part of the system. The U.S. Consumer Product Safety Commission’s proposed rule of June 24, 2026 would make UL 2849 mandatory for e-bikes, UL 2272 for other micromobility products and UL 2271 for user-replaceable battery packs, each with added requirements. As of November 22, 2026, it is still a proposal: the Federal Register shows no final rule.

This guide is for anyone deciding which e-bikes and batteries to allow, buy, rent or charge: property managers, HOA boards, campus risk and housing offices, and riders. It explains what each standard covers, what “certified” and “listed” mean, how to check a mark, and what the federal proposal would change. Where codes require these marks in buildings, it points to the code text.

The difference in one table

A safety standard is a published set of construction, testing and labeling requirements. A product is certified (or listed) when an accredited third party has evaluated it against that standard and authorizes the maker to apply its mark. Six standards show up around e-bike charging, and they answer different questions.

StandardTitleWhat it coversIn CPSC's 2026 proposalNamed in the 2027 IFC
UL 2849Electrical Systems for eBikesThe e-bike's electrical system, pedal assist or not, including onboard parts and off-board chargersUL 2849-20, for e-bikes4304.6.1: devices listed to UL 2272 or UL 2849
UL 2271Batteries for Use in Light Electric Vehicle (LEV) ApplicationsBattery packs and their battery management systems for e-bikes, e-scooters and similar vehiclesUL 2271-23, for user-replaceable battery packs sold separatelyNot named; batteries come with the listed device (4304.11)
UL 2272Electrical Systems for Personal E-Mobility DevicesE-scooters, self-balancing scooters, e-skateboards, e-unicycles and hybridsUL 2272-24, for other micromobility products4304.6.1
UL 2580Batteries for Use in Electric VehiclesElectric vehicle batteries; accepted by UL 2849 as an alternative battery pathReferenced through UL 2849Not named
UL 4900Micromobility Charging EquipmentMulti-unit chargers and battery exchange charging equipmentNot part of the proposal4304.8.1 and 4304.12
UL 1487Battery Containment EnclosuresCabinets that store or charge lithium-ion batteries and are meant to mitigate heat, fire and deflagration hazardsNot part of the proposal4304.10
Titles and scopes as described in the sources. Sources: CPSC notice of proposed rulemaking, Federal Register, June 24, 2026; ICC early release of 2027 IFC Chapter 43 (2026); NYC Buildings Bulletin 2025-009. Checked November 2026.

The short version for an e-bike buyer: look for UL 2849 on the bike. For a battery bought on its own, look for UL 2271 and the bike maker’s confirmation that it fits your model. For a charging cabinet or a multi-bike charger, look for UL 1487 or UL 4900, which the fire code chapter on batteries names. The standards are published by UL Standards and Engagement; the companies that test against them and apply marks are certification bodies, and there are several.

What UL 2849 certifies

UL 2849 is the bi-national U.S. and Canadian standard for e-bike electrical systems. UL Solutions says it began developing an Outline of Investigation for e-bikes in 2012, published it in 2013 as UL 2849, the Outline of Investigation for Pedal Electric Cycles, and saw it published as “UL 2849, the Standard for Electrical Systems for eBikes” on January 2, 2020 (UL Solutions). CPSC’s proposed rule calls the 2020 edition “still the current version of this standard” (CPSC proposed rule).

CPSC summarizes its scope as the electrical system of e-bikes, both pedal assist (which the standard calls Electrically Power Assisted Cycles, or EPAC) and non-pedal assist, “that are powered by a lithium-based, rechargeable battery,” including “onboard components, meaning those installed on the eBike, and off board components, including chargers used to charge batteries both on and off the eBike.” The standard defines an eBike as “a two or three wheeled electrical/mechanical device provided with functional pedals that includes one or more electric motors,” which either assist the rider while pedaling or drive the wheels when the rider is not pedaling.

The parts of UL 2849 that matter most for charging, as CPSC describes them:

  • User protection while charging (section 10). A battery meant to charge only off the bike must have a way to prevent charging while installed. A bike that charges with the battery installed must protect riders from shock, and must have a charger interlock or another means to keep the motor from starting while the charger is plugged in.
  • Battery packs (section 11). Lithium-ion packs must comply with UL 2271 or UL 2580. Packs built to two other battery standards may be used if they pass the extra tests in section 11.2.
  • Flammability (section 17). Polymeric materials must stop burning within a set time, which CPSC calls “critical for fire safety” because it slows fire spread during thermal runaway.
  • Input test (section 27). The current drawn while charging a fully discharged battery “should not be more than 110 percent of the manufacturer-rated input current.”

UL 2849 also has mechanical sections (40 and 41) that CPSC proposes to leave out of its rule, because the rule targets electrical hazards. Bicycles’ mechanical safety falls under a separate federal regulation, 16 CFR part 1512, which CPSC notes covers low-speed e-bikes as well.

The tests a certified bike goes through

CPSC’s review walks through UL 2849 section by section, and a few of the tests show what certification involves in practice:

  • Chargers (section 23). The charger must comply with one of four power supply standards (UL 1012, UL 1310, UL 60950-1 or UL 62368-1), the same family of standards used for laptop power supplies.
  • Temperature (section 28). Safety-critical components and the cells in the battery must stay within their temperature ratings while the bike runs at maximum rider weight and power “and also when being charged,” and surfaces a rider can touch must stay cool enough to avoid burns.
  • Abnormal operation (section 32). A series of nine tests, run on separate e-bikes, checks what happens when parts fail. During them the bike “must not emit flames or molten metal, or become a risk of fire or electric shock.”
  • Water (section 36). The battery enclosure is exposed to splashing water at the IPX4 level, then put through a charge and discharge cycle with no sign of shock or fire hazard.
  • Vibration (section 38). Components mounted on the bike are vibration tested, because a pack that rattles loose on rough pavement is a pack that can short.

None of these tests is something a buyer can repeat at home. That is the point of a third-party mark: someone with the equipment has done them.

Why the system matters

UL 2849 tests the parts together. A certified bike’s battery has been evaluated with that bike’s charger, controller and motor. Swap in a cheaper battery or a universal charger and the bike is no longer the system that was tested. The 2027 International Fire Code reflects this in Section 4304.11.1.1: batteries and chargers “shall be provided as part of the listed battery-powered micromobility device. This includes both nonremovable and removable batteries” (ICC early release).

What UL 2271 certifies

UL 2271 is the standard for batteries for light electric vehicles. CPSC describes it as containing “requirements for battery packs, including for BMS, that protect the cells within the battery pack during charging and discharging,” and gives e-bikes, e-scooters and personal e-mobility devices as examples of the vehicles it covers.

According to CPSC’s summary, UL 2271 and UL 2580 address thermal runaway by requiring:

  • protective circuits (the battery management system) that shut down charging or discharging when cell voltage, current or temperature goes out of limits;
  • mechanical and environmental tests such as vibration endurance, drop, crush, thermal cycling, immersion and external fire exposure;
  • thermal cycling to show a pack can handle “rapidly changing temperatures such as those encountered by moving a battery pack from an unheated garage in winter into a heated house”;
  • production-line testing of the cells; and
  • single-cell failure mitigation, so one cell going into thermal runaway does not spread to its neighbors.

UL Solutions adds that before a light electric vehicle battery pack can be certified to UL 2271, “the cells are required to be separately certified to UL 2580.”

Where UL 2271 sits next to UL 2849

The two standards overlap on purpose. CPSC explains that “OEM batteries that are sold with a micromobility product are generally covered by either UL 2849-20 or UL 2272-24; however, these UL standards reference battery requirements in UL 2271-23.” Section 11 of UL 2849 “accepts battery packs that have been tested to UL 2271-23, without additional testing, to reduce testing burden.” CPSC finds the battery requirements in UL 2271 similar to those in UL 2849, and finds the same gap in both: neither does enough to stop a consumer from opening the battery compartment, which is why it proposes a tamper-resistant enclosure for both.

What UL 2271 does not do is certify a bike. Its requirements stop at the battery. A UL 2271 pack on a bike whose charger, controller and wiring were never evaluated is a certified battery on an uncertified e-bike.

What the labels tell you

Both standards require labels that help you identify the product, find the right charger and respond to a recall. CPSC summarizes them:

Label item UL 2849 (the bike) UL 2271 (the battery)
Who made it Manufacturer’s name or identifying marking Manufacturer’s name, trade name or trademark
Which product Part number and model number Part number or model number
Electrical ratings Required Volts dc, and amp-hours or watt-hours, plus battery chemistry
When it was made Date of manufacture, and the factory if made in more than one Date of manufacture
Which charger “Use Only Charger (__)” where the battery management system sits outside the pack “Use Only (__) Charger,” visible to the user
Terminals Identification and polarity markings where needed Marked positive and negative unless keyed

If a battery label lacks a model number, a rating or a charger statement, that is a reason to ask questions before it charges anywhere. The watt-hour rating also matters for fire codes: the 2027 International Fire Code’s battery section exempts devices with batteries under 200 Wh, and almost every e-bike battery is larger.

Which mark to look for

Match the mark to the thing you are buying, renting or allowing into a building.

You are looking at The mark to ask for Also check
A complete e-bike UL 2849 certification of the bike The battery and charger are the ones it shipped with
A spare or replacement battery UL 2271 certification of the pack The bike maker confirms it fits your model
A replacement charger Supplied or approved by the bike maker Under CPSC’s proposal, aftermarket e-bike chargers would meet section 23 of UL 2849 and say “Use only with” a named product
An e-scooter or self-balancing scooter UL 2272 Same battery and charger rules
An e-bike conversion kit Under CPSC’s proposal, kit components would meet named sections of UL 2849 Fire services warn about kits with incompatible parts
A charging cabinet or locker UL 1487 listing, or an approved special design Ask whether the listing covers charging, not only storage
A multi-bike charger or swap cabinet UL 4900 The fire code official approves the location

For a host, the line between UL 2849 and UL 2271 matters most at replacement time. A fleet that starts with certified bikes can drift as batteries are replaced. Section 4304.11.1.2 of the 2027 IFC allows a replacement battery that is “compatible with the listed battery-powered micromobility device in accordance with the battery-powered micromobility device manufacturer’s instructions,” and Section 4304.11.1.4 prohibits batteries and chargers that do not meet that test. A replacement plan should name where batteries come from before the first one fails.

Conversion kits and aftermarket chargers under the proposal

Two products sit outside the neat bike-or-battery split, and CPSC’s proposal treats them directly. For e-bike conversion kits, a battery pack in the kit would have to meet sections 9 and 12 of UL 2849, its outer enclosure “must not be capable of being opened using common household tools,” and a kit charger would have to meet the UL 2849 sections on chargers and charging safety, with a connector that “shall prevent misalignment, reverse polarity, or electrical mismatch.” Motors, controllers and operator displays sold in kits would meet their matching UL 2849 sections. Aftermarket chargers sold for e-bikes would have to comply with section 23 of UL 2849 and carry the “Use only with” warning naming the product they fit. Until a final rule takes effect, none of this is required, which is one more reason to buy chargers and batteries from the bike’s maker.

Certified, listed or “tested to”: what the words mean

These words are not interchangeable, and sellers sometimes blur them.

  • Certified. An accredited certification body evaluated the product against the standard and authorized its mark. UL Solutions states that certification to UL 2849, UL 2272 and UL 2271 “can ONLY be issued by an ISO/IEC 17065 accredited product certification body or by an OSHA Nationally Recognized Testing Laboratory recognized for these Standards.”
  • Listed and labeled. The fire code’s phrase. Section 4304.6.1 of the 2027 IFC requires micromobility devices to be “listed and labeled in accordance with UL 2272 or UL 2849, as applicable.” Certifiers use the same language: UL Solutions says complete e-bikes evaluated to UL 2849 are “Listed under UL Solutions product category QGNS,” and OSHA describes how a certifier, after certifying a product, “authorizes the manufacturer to apply a registered certification mark to the product.”
  • “Tested to UL 2849.” UL Solutions puts it bluntly: “Tested to a standard is not compliance or certification.” A test report from one lab on one sample is not an ongoing certification with a mark.
  • Nationally Recognized Testing Laboratory (NRTL). OSHA’s program recognizes private organizations to certify products, and “each NRTL has a scope of test standards that they are recognized for, and each NRTL uses its own unique registered certification mark(s)” (OSHA NRTL Program). OSHA publishes the current list of NRTLs.

Component marks are not product marks

A certification mark on one part does not certify the bike. UL Solutions explains that motor controllers “are typically UL Recognized Components evaluated under UL 2849,” and that light electric vehicle batteries “can also be recognized as components to UL 2271.” Its note on component recognition is blunt: such components “are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment,” and “the final acceptance of the component is dependent upon its installation and use in complete equipment.” A seller who points to a recognized cell, controller or charger is describing a part. For a bike, the question is still whether the complete e-bike is certified to UL 2849.

The same caution applies to wording on boxes and web listings. “Meets UL standards,” “UL tested” and “built to UL 2849” are claims about intent, not records you can look up.

What federal compliance would and would not mean

The CPSC proposal would make the standards mandatory, but it would not require a third-party mark on every product. Under section 14(a) of the Consumer Product Safety Act, as CPSC explains, “non-children’s products are not required to be third party tested, but each product must be tested (either first or third party), or products must demonstrate compliance using a reasonable testing program and be certified based on passing test reports.” Children’s products would need testing by a CPSC-accepted third-party lab.

So after a final rule, an adult e-bike could comply with federal law on the strength of its maker’s own testing and certificate. Fire codes and some local laws ask for more: a listing and label from an approved certifier. A host who wants a third-party mark should keep asking for one by name.

How to verify a mark

A mark on a sticker is a claim. Checking it takes a few minutes and is worth doing before a purchase, and again when a seller substitutes a model.

  1. Find the mark on the product, not the box. Look on the frame, the battery case and the charger. The mark should name the certifier.
  2. Identify the certifier. Check that the organization appears on OSHA’s list of NRTLs or is an accredited product certification body, and that the standard (UL 2849, UL 2271 or UL 2272) is within what it certifies.
  3. Look the product up in the certifier’s directory. Certifiers publish searchable records. UL Solutions, for example, says its certified products “can be found using our complimentary search tool UL Product iQ,” and lists complete e-bikes under its product category QGNS and light electric vehicle batteries under BBCA. Search by manufacturer and model.
  4. Match the model exactly. The listing should name the same manufacturer and model as the bike or battery in front of you. A certificate for a different model, or for one component only, does not cover the whole product.
  5. Check recall notices. Before use, and after any recall alert, check the serial numbers against recalls from the manufacturer and the CPSC.
  6. Keep the records. For a fleet or a building, file the listing records, model numbers and serial numbers with the purchase documents.

The need for these steps is real. CPSC cites a 2023 survey of brick-and-mortar retail stores that found “10 of 93 eBikes, and 17 of 19 OMPs, displayed a mark from an accredited certification lab,” while cautioning that the sample was small, did not include online sellers and did not test the products. On that evidence, CPSC “preliminarily determines” that micromobility products are unlikely to substantially comply with the standards without a rule.

What CPSC’s 2026 proposed rule would change

CPSC published its notice of proposed rulemaking, “Safety Standard for Lithium-Ion Batteries Used in Micromobility Products and Electrical Systems of Micromobility Products Containing Such Batteries,” on June 24, 2026, under docket CPSC-2025-0012. It would add a new 16 CFR part 1265.

What it covers

The rule would apply to micromobility electrical systems, “including all components that make up an electrical system, such as lithium-ion batteries, battery management systems (BMS), chargers, and any other electrical component,” and also to user-replaceable battery packs sold separately, aftermarket chargers and components of e-bike conversion kits. CPSC states that its jurisdiction “includes commercially owned micromobility products that are used by consumers, for instance in rental fleets,” which is relevant to anyone running or hosting a shared program.

Which standards, and what changes

Each product would have to meet its standard “with modifications”:

  • E-bikes: UL 2849-20 (ANSI/CAN/UL 2849:2020).
  • Other micromobility products: UL 2272-24 (ANSI/CAN/UL 2272:2024).
  • User-replaceable battery packs: UL 2271-23 (ANSI/CAN/UL/ULC 2271:2023).

CPSC found the current editions “inadequate to eliminate or adequately reduce the unreasonable risks of injury” on their own and proposes:

  • a tamper-resistant battery enclosure for UL 2849 and UL 2271 products, so a pack cannot be opened with “common household tools, such as a flat blade or Philips head screwdriver”;
  • a post-discharge charge test for UL 2849 and UL 2271, so the BMS refuses to charge a battery whose cells are too hot right after a full discharge;
  • a reverse polarity test for all three, to prevent damage from an incompatible charger; and
  • revised warnings and instructions covering electric shock, thermal runaway, homemade batteries and unsafe charging.

CPSC also proposes that UL 2272 products not use that standard’s option of a tamper-evident seal in place of a tamper-resistant enclosure, and that every aftermarket charger carry a “Use only with” warning naming the product it fits.

Why CPSC proposed it

CPSC says it is aware of 227 incidents from 2019 through 2023 that the rule potentially could have prevented, “involving fires, explosions, gas releases, burns, overheating, and smoke inhalation”; 90 of them are associated with 39 deaths and 181 injuries. Its staff forecast an average of 19.2 million micromobility products in use each year from 2026 to 2030, about 11.2 million of them e-bikes, and estimated an overall weighted compliance rate of about 45 percent.

Each proposed change answers a pattern in the incident data. CPSC counted 120 incidents during charging, which the post-discharge charge test targets. It counted 17 incidents involving aftermarket batteries or chargers, which the reverse polarity test and the “Use only with” marking target. And it counted eight incidents after a user removed or replaced a battery and four involving homemade batteries, three of them fatal, which the tamper-resistant enclosure targets. In CPSC’s words, the enclosure requirement would reduce the likelihood of “consumers easily accessing the battery compartment using common household tools.”

What it would cost, and who it reaches

CPSC estimates the incremental cost of making a noncompliant e-bike compliant at an average of $230 per unit in the first year, and expects that figure to fall over time. For context, it puts the average price across all e-bikes at about $3,150. It estimates that only about 11 percent of e-bike products currently comply, far below its estimates for scooters and other products. It identified 36 small micromobility manufacturers and 20 small importers that could be affected, and it found at least 21 laboratories accredited to test to UL 2849-20, 34 to UL 2271-23 and 11 to UL 2272-24, a sign that testing capacity exists beyond any single certifier. CPSC says it does not expect “a significant change in the market that would affect the availability of these products.”

Timing and status

2013 UL 2849 begins as an Outline of Investigation Jan 2, 2020 UL 2849 published as a U.S. and Canadian standard Mar 20, 2023 NYC certification law signed (Local Law 39) Sep 16, 2023 NYC deadline: UL 2849, UL 2272, UL 2271 Mar 15, 2024 Washington requires UL 2272 or UL 2849 listing May 28, 2025 Colorado HB25-1197 signed: lab-certified batteries Jun 24, 2026 CPSC proposed rule published Jul 23, 2026 ICC releases 2027 IFC Chapter 43 early Aug 24, 2026 CPSC written comments close Oct 21, 2026 CPSC virtual meeting for oral comments Nov 22, 2026: no final rule yet
Dates as stated by each source. Sources: UL Solutions (August 1, 2023, and its UL 2849 service page); Washington WAC 51-54A-0323 history note; Colorado General Assembly HB25-1197 page; Federal Register documents 2026-12749 and 2026-20296; ICC newsroom; Federal Register document search, checked November 22, 2026.

Written comments were due August 24, 2026. A second Federal Register notice, published October 5, 2026, set a virtual meeting for oral comments on October 21, 2026 (Federal Register notice). A search of the Federal Register on November 22, 2026 showed those two documents as the latest in the rulemaking, with no final rule.

If CPSC adopts a final rule as proposed, products “manufactured after the proposed 180-day effective date must comply,” and the rule would prohibit manufacturers and importers from stockpiling noncompliant products ahead of that date. The final text can differ from the proposal, so treat every detail in this section as proposed, not settled.

What the proposal would not do

It helps to be clear about the limits, because a federal rule is easy to over-read.

  • It would not reach bikes already built. CPSC states that the rule “would be applicable to products manufactured after the effective date.” E-bikes and batteries already in garages, dorms and fleets would not become compliant or noncompliant overnight. CPSC’s existing tools still apply to them: from January 1, 2016, through November 30, 2024, it conducted 29 voluntary recalls of micromobility products for fire, overheating and smoke inhalation hazards and issued nine press releases warning people to stop using particular products.
  • It would not regulate where you charge. The rule covers how products are built, tested and labeled. Where a battery may charge in a building is a fire code question, and how to charge at home is a matter of practice that fire services address.
  • It would not cover charging cabinets or multi-bike chargers. UL 1487 enclosures and UL 4900 charging equipment are not part of the proposal; the fire code names them.
  • It would not require a third-party mark on adult products. Under the Consumer Product Safety Act’s certification rules, a maker’s own testing program could support compliance for products that are not children’s products.

For a host, the practical reading is that the rule, if adopted, raises the floor for new products. It does not replace the equipment standard you write into your own agreement today.

Where fire codes and local laws already require these marks

Federal rules are not the only place these standards carry weight. Several codes and laws already name them.

  • 2027 International Fire Code (early release). Section 4304.6.1 requires micromobility devices to be “listed and labeled in accordance with UL 2272 or UL 2849, as applicable.” Section 4304.11 requires batteries and chargers to come with the listed device or be compatible replacements under the maker’s instructions. Sections 4304.10, 4304.8.1 and 4304.12 name UL 1487 for containment enclosures and UL 4900 for multi-unit and battery exchange charging equipment. These apply where a jurisdiction adopts or applies the chapter, and the fire code official decides. Our guide to e-bike charging room fire code requirements walks through the whole section.
  • Washington. WAC 51-54A-0323, effective March 15, 2024, says in Section 323.3: “Powered micromobility devices shall be listed and labeled in accordance with UL 2272 or UL 2849, as applicable.”
  • New York City. Local Law 39 of 2023 requires micromobility devices sold, leased or distributed in the city to be tested and certified to UL 2849, UL 2272 and UL 2271, according to UL Standards and Engagement (ULSE). FDNY describes the city’s battery law as prohibiting the sale of mobility device batteries “unless such batteries have been listed and labeled by a nationally recognized testing laboratory or other approved organization” (FDNY).
  • Wyoming. The state’s e-bike statute, W.S. 31-5-707, requires manufacturers and distributors to label each e-bike with its class, top assisted speed and motor wattage, and requires e-bikes to comply with CPSC’s bicycle requirements in 16 CFR 1512, which address mechanical hazards. It does not name UL 2849 or UL 2271. Wyoming adopted the 2024 International Fire Code on June 28, 2024, and UL Solutions notes that the 2024 IFC includes requirements for listing micromobility devices to UL 2272 or UL 2849; check with your local fire code official how that applies to your building.
  • Colorado. HB25-1197, signed May 28, 2025, requires that a lithium-ion battery for an e-bike be “certified by an accredited testing laboratory for compliance with certain battery standards,” with the lab’s certification or name on the packaging, documentation or battery, according to the bill summary (Colorado General Assembly).

UL 2849 or EN 15194?

Colorado’s e-bike tax credit says the e-bike “must be UL 2849 or EN 15194 certified” (Colorado Energy Office). EN 15194 is the European standard for electrically power assisted cycles. CPSC compared the two and chose not to base its rule on EN 15194, which it says “has a narrower scope than UL 2849, and only covers EPAC (pedal-assisted) eBikes,” and does not include the flammability requirements in section 17 of UL 2849. A bike that qualifies for a tax credit with an EN 15194 mark may not satisfy a building rule or a fire code that names UL 2849.

What hosts, campuses and riders should ask for

Put the standard in writing, wherever you make the decision: a purchase order, an operator agreement, a lease rule or a campus policy.

For hosts and campus offices vetting a program or a vendor

  1. Every e-bike certified to UL 2849 by an accredited certification body or a recognized NRTL, with the listing record for each model.
  2. Every battery certified to UL 2271, or evaluated as part of the bike’s UL 2849 certification, and replacement batteries only from the bike maker or to the maker’s instructions.
  3. Only the maker’s chargers, or chargers the maker approves, plugged directly into an outlet.
  4. Serial numbers recorded and checked against recall notices before use and after each recall alert.
  5. Any charging cabinet listed to UL 1487 and any multi-unit charger listed to UL 4900, with the fire code official’s approval of the location.
  6. A written plan for damaged batteries: out of service, never charged, stored away from buildings and recycled.

The battery safety checklist turns these into items you can tick, and the campus micromobility checklist includes equipment standards in its operator agreement section.

Shared fleets and rentals

A shared or rented e-bike is not exempt from any of this. CPSC’s proposal states that its jurisdiction “includes commercially owned micromobility products that are used by consumers, for instance in rental fleets.” New York City’s Local Law 39 reaches devices that are sold, leased or distributed. The fire code’s listing requirement in Section 4304.6.1 attaches to the device, not to who owns it. For a host, the practical consequence is that an operator’s equipment standard belongs in the written agreement, with the right to see listing records and recall checks, and with the same standard applying to every replacement bike and battery for the life of the program.

What Colibrino specifies

Colibrino specifies lightweight Class 1 pedal-assist e-bikes certified to UL 2849, with every battery certified to UL 2271 or tested as part of the UL 2849 system, by a nationally recognized testing laboratory, and checks bikes and batteries against CPSC recall notices. These are requirements Colibrino places on the equipment it puts into service; the company itself holds no UL certification. The e-bike fleet page describes the full specification, and the safety page explains how charging stays in the station bays.

Example (fictional). Larkspur Commons, a fictional 240-home apartment community, is comparing proposals for a 14-bike shared program. One proposal lists “UL 2849 tested” bikes and spare batteries “compatible with” the bikes, with no certifier named. The manager asks for three things: the certifier’s listing record for the bike model, the certification for the batteries or confirmation that they are the bike maker’s own packs evaluated with the UL 2849 certification, and the source of replacement batteries over the program’s life. The second proposal answers all three with listing records the manager can look up, and names the maker’s own chargers for every bay. The manager files the records with the network plan and adds a line requiring the same standard for any replacement bike or battery.

For riders buying or renting

  • On a new bike, look for UL 2849 on the frame or the battery and charger, and check the listing.
  • For a spare battery, buy the bike maker’s battery or one the maker approves, certified to UL 2271. Avoid unbranded packs and anything rebuilt.
  • Keep the charger that came with the bike. If you lose it, replace it with the maker’s own.
  • Register the bike with its maker so recall notices reach you.

Certification lowers the risk; how you charge still matters. Our guide to charging an e-bike indoors or overnight covers where, when and how.

What to do next

  • Check the marks you already have. Pick one bike or battery in your building or garage and walk the six verification steps above.
  • Write the standard into your rules. A lease addendum, house rule or campus policy can name UL 2849 for bikes and UL 2271 for loose batteries; read what landlords can require of e-bike batteries first.
  • Watch the federal rule. Search the Federal Register for docket CPSC-2025-0012 to see whether CPSC has issued a final rule, and when it takes effect.
  • Read the rest of the section. Our charging and batteries section covers charging rooms, winter storage and how shared fleets stay charged.

If you are weighing a shared program and want the equipment specification in writing before anything is installed, you can plan a station and start with a site walk.

Thinking about a station?

If this article describes a question at your property, campus or neighborhood, tell us about the place. We start with a site walk and a written plan.