Colibrino homePlan a station
Menu

E-bike charging cost calculator

What a station adds to the electric bill, worked out from rides, energy per mile and your own electricity rate.

For: Hosts paying for station power, property managers and campus facilities

A glass jar with a few coins and a charger cord coiled around it, on a kitchen counter beside a light switch plate.

Calculator

Example values are filled in (the fictional Larkspur Commons network or stated assumptions). Replace them with your own; results update as you type. Nothing you enter leaves your browser.

Lightweight pedal-assist bikes on flat streets at moderate assist.

Results

Energy per ride, at the outlet
31.8 Wh
Electricity cost per ride
$0.0041
Rides per dollar of electricity
242
Energy per bike per 30 days
1.91 kWh
Cost per bike per 30 days
$0.25
Cost for the fleet per 30 days
$3.47
Cost for the fleet per year
$42.20

Electricity is a small part of running a bike network. Repairs, parts, batteries, labor and insurance cost far more, so do not size a budget from this number alone.

Hosts often want to know what a station adds to the electric bill. The short answer is very little, and this calculator shows how little. It works from rides rather than from the battery: how far each ride goes, how much energy a mile takes, how much is lost in the charger, and what your utility charges.

How to use the calculator

  • Average ride length: 1.8 miles by default, the typical trip in the fictional Larkspur Commons example.
  • Energy used per mile: energy taken from the battery. The default, 15 Wh per mile, is a planning assumption for lightweight pedal-assist bikes on flat streets at moderate assist. Hills, headwinds and higher assist raise it; the range estimator shows how much.
  • Rides per bike per day: 2 by default.
  • Charger efficiency: the share of energy from the wall that reaches the battery, 85% by default.
  • Electricity price: take it from your own bill, total charges divided by kWh, so delivery charges are included. The default, $0.13 per kWh, is an example rate, not a quote from any utility.
  • Bikes in the fleet: 14 in the fictional example.

The method

Result Formula
Energy per ride, at the outlet miles × Wh per mile ÷ efficiency
Electricity cost per ride energy per ride in kWh × price
Rides per dollar 1 ÷ cost per ride
Energy per bike per 30 days energy per ride × rides per day × 30
Cost per bike per 30 days energy per bike × price
Fleet cost per 30 days, and per year cost per bike × bikes; then × 365 ÷ 30

The default example, worked through

Example (fictional). Larkspur Commons, a fictional 240-home apartment community, runs 14 bikes, and a typical ride is 1.8 miles. 1.8 miles × 15 Wh = 27 Wh from the battery; 27 ÷ 0.85 = 31.8 Wh from the outlet. At $0.13 per kWh, that is $0.0041 a ride, or 242 rides per dollar of electricity. At 2 rides a day, one bike draws 31.8 Wh × 2 × 30 = 1,906 Wh, shown as 1.91 kWh per 30 days, costing $0.25. The 14-bike fleet costs $3.47 per 30 days and $42.20 a year.

How to read the result

Electricity is a small line, and even a deliberately heavy assumption does not change that. The station power calculator sizes the circuit as if every bike used 40% of a 400 Wh battery every day. For 14 bikes at that rate, the arithmetic is 14 × 160 Wh ÷ 0.85 × 30 days = 79.1 kWh, or about $10.28 per 30 days at the same example rate. The two tools answer different questions: one asks whether the circuit can carry a heavy day, the other what a normal month costs.

Two rides per bike every day is also on the high side. In the fleet size calculator example, 14 bikes serve 27 rides on the busiest day (about 1.9 per bike) and 19.3 on an average day (about 1.4 per bike). Lower the rides per bike to see a more typical month.

If the station runs on your circuit, this is roughly what it adds to your bill. The bigger costs of a program sit elsewhere.

Limits and assumptions

  • Electricity is a small part of running a bike program. Repairs, parts, batteries, labor and insurance cost far more, so do not size a budget from this number alone. The amenity budget worksheet works from the full program cost.
  • The price is treated as flat. Accounts with demand charges or time-of-use rates may pay a different effective rate; use your own.
  • Power the station itself uses for locks, lights or a display, and anything a charger draws while idle, is not included.
  • Energy per mile varies with the rider, the route, the assist level and the weather.

What to do next

Check the circuit with the station power calculator, and read how stations are installed and powered on charging stations. The full fictional plan these numbers come from is on the example network page. For figures based on your own property, plan a station.

Start with one station.

Tell us about the place: how many homes or beds, where people come and go, and where the nearest outlet is. We reply with questions or a time to walk the site with you.